Dyson Airwrap Shelf
Print Profile(1)
Description
Shelf for Dyson Airwrap.
This shelf was designed to mount the Dyson Airwrap to the wall. The shelf has a twist-lock mechanism, that matches the mechanism used on the Airwrap. All accessories will be in held place so they can never fall off the shelf. Some support removal is necessary inside the twist-lock mechanism. This was unavoidable due to the way the shelf prints. The support comes off easily with some pliers, though.
The drywall anchors and screws I used to model the screw holes after are listed in the BOM below. Screw holes are made to be accessible with a regular handheld screwdriver.
BOM:
- #8 Drywall Anchors & Screws, QTY = 6
Approximate Dimensions:
- Shelf = 230mm x 70mm x 40mm
- Hanger = 58mm x 12.5mm x 98mm
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (19)