Year of the Snake Stereoscopic Paper-Cut Relief Painting, "Auspicious Golden Snake"

An original artistic relief print design in a three-dimensional paper-cut style

Optimized slicing parameters, 0.08mm layer height, 4-color print, AMS is not required, manual material change is sufficient

Two size profiles: P1s prints large size (230mmX230mm), completion in four hours; A1 mini prints small size (170mmX170mm), completion in over three hours

Filament colors used:
Black, Blue-gray, Orange, White
Both PETG and PLA are acceptable!!! PLA is recommended for better printing results!!!! Here are photos of the finished print

Manual slicing or AMS-less users, filament color and replacement instructions:
Black for the base layer, switch to blue-gray at layer #7 (0.64 mm)
Switch from blue-gray to orange at layer #12 (1.04 mm)
Switch from orange to white at layer #21 (1.76 mm)

Of course, you can also experiment with four other colors and preview the effect in your slicer software

For those who need a tabletop or wall-mounted frame, you can download and print this model here, featuring an integrated stand for effortless printing without supports, perfectly compatible with both sizes of the relief print

https://makerworld.com.cn/zh/models/838112#profileId-823255