Mini airplane 12.0 - Jet Fighter
Print Profile(1)
Bill of Materials
Description
Version miniairplane 12.0 this time in the shape of a fighter.
The wings must be printed on 3 layers for better strength, so the first layer is set to 0.12mm and the next layers to 0.08mm. This setting has worked for me several times.
The inner fill of the model is set to 20%.
Before removing the model from the printing mat, wait for it to cool down, the miniairplane is easier to remove and the wings will not be crooked.
if the back part won't go in, use scissors and trim the pin a bit, use a drop of glue for better strength, but not necessary
be careful with the cool plate, it is very difficult to remove
You can also use the included launcher
For the launcher, you can also use a coarser rubber
Check out my other models: https://makerworld.com/en/@Marek69
Boost Me (for free)
If this model inspires you, I'd be happy for a boost
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)