Search models, users, collections, and posts
LX7 FPV Drone Frame
IP Report
Print Profile(1)
0.2mm layer, 3 walls, 15% infill
Designer
3.3 h
1 plate
Open in Bambu Studio
Boost
1017
2165
70
33
2.6 k
762
Released
Description
LX7 FPV Drone Frame
This LX7 FPV drone frame is a 3D-printed model designed for display, prototyping, or light assembly practice. Printed using PETG HF, it serves as a detailed representation of the frame design.
Important Notes:
- This is a model frame and is not intended for flight.
- If you choose to fly it, you do so at your own risk.
To complete the frame, you will need:
- M3 screws x 16 (Length depends on your method to attach it to the standoffs; brass heat-set inserts were used for modeling purposes)
- 25mm standoffs (plastic standoffs included are for modeling purposes only; they will need modification to assemble)
- The standoffs will either need to be drilled for the heat inserts or drilled for the diameter of the screws being threaded into them.
- M5x12mm barrel nuts x 4
This frame is ideal for showcasing drone designs or as a base for prototyping. Fly at your own risk.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (70)