Auspicious Spring Festival - New Year's Couplets Window Decorations Collection - Free 3D Print Model

Search models, users, collections, and posts

IP Report

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

28.2 h

8 plates

5.0(1)

Open in Bambu Studio

Boost

Released

Content has been automatically translated.

Show original

Various window decorations of the character 'Fu' (fortune), choose your favorites to print! 🎉

Default Size: 25cm × 25cm
Thickness: 0.6mm, this thickness balances print quality and time. PLA below this thickness is prone to cracking due to light exposure or prolonged storage; PETG also supports this thickness, or you can adjust it to 0.4mm.
Front and Back Selection: By default, the front is the top surface after ironing, with a delicate effect. If you prefer a diamond-like particle effect (as shown below), select the 'Fu' character in your printing software, press the F key to select the bottom surface, then click on the top surface of the 'Fu' character, flip it over, and then print.
Removal Tips: After printing, wait for the heat bed to cool completely, and the 'Fu' character will naturally fall off. If you need it urgently, you can put it in the refrigerator to cool before removing it. Do not forcibly pull it off.
Adhesive Tips: Using hot bed adhesive spray, you can directly paste it onto smooth surfaces such as glass and wood. You can simply wash it off with water when removing it, leaving no residue.