Wine Glass Holder Wine Hike

Update:
The model has been enlarged and adapted for larger white wine glasses and red wine glasses.

---------------------------------------------------------------------------------------------

Wine enthusiasts know the problem: you're enjoying a leisurely wine hike or a celebration, wine glass in hand, but suddenly need your hands free.

That's precisely why we developed this wine holder, suitable for both white and red wine glasses.

You will need:

• The two 3D-printed parts (one for the top and one for the bottom)
• Approximately 90cm of 4mm diameter paracord
• Two small pieces of heat-shrink tubing with adhesive

Assembly:

• Print both parts and correctly position them on top of each other (the flat ends of the printed parts face you).

• Thread the paracord through both holes from one side and then to the other, so that both ends emerge from the underside.
   

  

• Fold over both ends and secure them with the adhesive heat-shrink tubing.
   

  

• Insert your wine glass and enjoy!
   

  

  Of course, you are also welcome to use and further develop the original Onshape model: https://cad.onshape.com/documents/ab515172f72d21caa1d30394/w/85c376a3031fc8d3db270c5a/e/777321da0e27f509784042e2

Happy Printing!