AMS / AMS 2 Stacker Pulls w/Filament Samples

UPDATE: Added new pulls to fit an AMS 2 Pro system!

This is a small extension to the finger pulls in the original AMS Stacker Roller Edition by RabidRabbit by adding holes, allowing filament sample holders to be added to the pull.  These allow you to see what filaments you have loaded into the AMS slots, if desired.

I used M2 x 2mm heat inserts in the filament holders, and M2 x 4mm screws to mount them through the pull rail.

The filament samples themselves are something you can personalize by forking https://github.com/ppwaskie/filament_samples, and use OpenSCAD to generate your own.  That repo is a fork of a fork, so please feel free to fork at the source, or mine.

My filament sample holders were also modeled after my friend's filament sample display: https://makerworld.com/en/models/32691#profileId-71108

This main profile was built using PETG-HF for both my Luigi (green) and Mario (red) stacker builds.  Another profile is posted with the same thing, but with PLA to match the original designer's builds.  Profiles exist for both the original AMS and also the slightly wider AMS 2 Pro.

I want to thank RabitRabbit for all their support in my build, and being open to me sharing this small mod for anyone else who would like to have this addition.  And also UltraJaxel for the original AMS Stacker.

As I try to do with all of my models, I've included both STEP and STL files for all models in the projects.  Feel free to adjust as necessary for your own needs.  If you need/prefer the CAD model itself, DM me and I'll try to send you a link to my OnShape project for the model.

Thanks, and happy printing!