RC Absima Sherpa CR 3.4 Window Grilles

Update 01.02.2025:

Upon request, I have also created the rear window.

If a windshield wiper is installed, the grid of the second plate must be printed and the two parts glued together.

Here are the window grilles I have created.
Screws are merely indicated; I secured the grilles with double-sided adhesive tape.

Enjoy printing :-))

Print Settings

Supports: 

No

Resolution:                      

0.2

Filament: essentially any will do, I used PLA

Should you appreciate my work, I would be grateful for your support via a comment, like, or boost

-----------------------------------

Here are the window grilles I created.
Screws are merely indicated; I secured the grilles with double-sided adhesive tape.

Have fun printing :-))

Print Settings

Supports:

No

Resolution:                      

0.2

Filament: doesn't really matter, I used PLA

If you like my work, please support me with a comment / like or boost

Use at your own risk !

Small parts can be swallowed. Use only under adult supervision.

I assume no responsibility !