Metii

cover

PXL_20250111_125206069.jpg

PXL_20250111_125401935.jpg

PXL_20250111_125524774.jpg

PXL_20250111_125548826.jpg

plate_1.png

Smaller version 0.2mm layer, 2 walls, 15% infill

High version 0.2mm layer, 2 walls, 15% infill 

tomas

PXL_20260326_202141882.jpg

I had printed the high version originally, but because of the very slight indent around the ports on the A1, the connector did not fully seat in the port. This meant that any slight jostle of the printer was causing the AMS Lite to disconnect and I thought my cable had been broken. Turns out, it was just loose in the port. After some trial and error, I figured out the issue.&nbsp;I simply trimmed the front portion of the model so that the height that is outside the indent sits back a small amount. This is just a quick and dirty modification and could probably be done nicer looking, but it is out of sight and works for me.

High version but trimmed - 0.2mm layer, 2 walls, 15% infill

<h2 style="text-align: center">Ams Lite Plug Cover</h2>Short version takes about 16 minutes and 2grams of filament to printHigh version  takes about 40 minutes and 7 grams of filament to print<h3 style="text-align: center">very easy to insert</h3>Hi, here are my two simple designs for ams cable plug covers to protect them from any forces that might damage the socket.

Ams Lite cable plug covers (A1)

ASIA

Print Profile(3)

Description

Ams Lite Plug Cover

very easy to insert

Comment & Rating (25)

License

Related Models