Simple Box - Customize or small ready print

Simple Box with Lid - Custom Size

Select Customize to make your very own box and size

OR 

Select one of the “Ready To Print” profile options.

• There are so many ready to print sizes that they are split in to 2 models - These are the “Smaller” sizes (under 100 mm)
• Select from these 35 smaller sizes here
• For bigger sizes and other box types checkout
  • All My Boxes
  • Slide Box - 25 Sizes x 24 mm deep (Loose Fit Lid)
  • Slide Box - 25 Sizes x 24 mm deep (Tight Fit Lid)
  • Slide Box - 24 Sizes x 36 mm deep (Tight Fit Lid)
  • Simple Box - 35 Sizes (< 100 mm)
  • Simple Box - 30 Sizes (> 100 mm)
  • Snap Fit Box - 35 Sizes (< 100 mm)
  • Snap Fit Box - 30 Sizes (> 100 mm)
• These boxes have a perfect snug fitting lid - may loosen with use
• I also have Slide Lid Boxes for a more secure lid
• Internal dimentions are 4 mm less than the profile name suggests (2 mm walls)
• These models will not simply resize in Bambu Studio - walls get too thick / thin

These little boxes can be used for so many things including small item storage and electronic projects.

Feel free to add holes or supports inside. In Bambu Studio, right click and add a part or negative part for a hole.

After you download your custom box, you need to :

• Select it (click it)
• Click "Split to Objects"
• Click "Arrange all objects"
• Click "Auto Orient" (lid should now be top / flat side down)
• Use a standard 0.2 mm layer preset. I personally like one wall on first layer

Also checkout:

My Other Boxes

My Other Designs