Google Home IKEA Skadis Mount V2 - T-Clips system

I used T-clips as a mounting system, otherwise I constructed it completely myself:

I needed a simple mount for my Google Home smart speaker for my Ikea Skadis Pegboard and have not yet found a model with a T-clip system. So I made one myself with Fusion 360.
It has a very slim design, but fulfils its purpose.
I have provided two cut-outs for the cable so that you can remove the device from the base at any time without unplugging it. The cable is not routed directly to the back, but rotated by 45 degrees so that you can still reach the button on the Google Home.
I printed it with PLA and a 0.4 mm nozzle.
You can also find two T-clips in the files or in the 3mf file (for painted Skadis) .
The base including two T-clips requires just 52.83 g of filament.
I'm happy with it and hope you are too!

I printed in PLA with the following settings:

4 walls
30% gyroid infill
4-5 top and bottom layers
Layer High: 0,2 mm
No supports needed.
 

Update from 18.01.2025
Version 2 with reinforced rear panel so that T-clips sit tighter. I have also added a T-clip for unpainted skadis.