Adjustable Laptop Wall Mount
Print Profile(1)
Description
Boost Me (for free)
Wish to support me without paying for a license? Consider boosting my models!
Membership
Wish to sell prints of my exclusive models? Sign up for only $5 per month for a license to sell prints of all my models.
This is a simple adjustable wall mount. The design was made for an ASUS TUF Dash F15 laptop, so as long as yours is <10.5" from front to back, it should fit in this mount. I've included the step file so it can be adjusted if needed.
Things you'll need for this model:
- (4) M5x20 Hex Head Cap Screws
- (4) M5 Nuts
- Mounting Screws (The hole diameter is 6mm and the inset is 10mm, so you'll need screws with a major diameter of <6mm and <10mm head diameter)
Printing/Assembly:
- I printed this with 6 walls and 15% infill, but the stronger the better. It works with generic settings otherwise.
- To assemble, lay out the pieces as shown in the images with the slotted arm on top and the straight arm on bottom. Install the cap screws into the arm joints. One side is designed specifically for the nut and one for the screw. The weight of the laptop will hold the arms in place, so once it's assembled, you're ready to mount.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (29)