Drybox 4L v2 amazon spool bambulab

A 4L Amazon drybox (printed with a Bambu Lab A1 mini) with hygrometer support, entirely designed for the components listed below, perfectly fits Bambu Lab spools and any spool up to 69mm in diameter

A calcium chloride container has been added; it absorbs significantly more moisture than silica gel and is very inexpensive. I am using the one linked below, easily available from Leroy Merlin:

https://www.leroymerlin.it/prodotti/ricarica-sali-assorbiumidita-air-max-1000-g-neutro-82362394.html

Add two small pieces of absorbent paper to the bottom of the container for added security and replace the calcium chloride every 3-4 weeks

Printed in PLA Matte

No resizing is needed if you purchase the listed products

The file also includes a cap for the PC4-M10 connector, for filament and PTFE tubing. If you encounter size issues with the PTFE cap, adjust the X-Y contour compensation setting to -0.1

For the pneumatic PC4-M10 connector cap, adjust the X-Y hole compensation to 0.24

Cereal Box: https://www.amazon.it/dp/B0BL379HYX?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Bearings: https://www.amazon.it/dp/B07HGXXX37?ref=ppx_yo2ov_dt_b_fed_asin_title

Hygrometer: https://www.amazon.it/dp/B0DMNXWD5X?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Pneumatic Connectors: https://www.amazon.it/dp/B0CNTJ6P8W?ref=ppx_yo2ov_dt_b_fed_asin_title

PTFE Tubing: https://www.amazon.it/gp/product/B0D1CLBP4W/ref=ox_sc_act_title_1?smid=A38VAFFSU0CRVO&psc=1

TO INSTALL THE SCREW-ON CONNECTOR SUPPORT FITTING, DRILL A HOLE APPROXIMATELY 12/13 MM IN DIAMETER

TO INSTALL THE SINGLE PNEUMATIC CONNECTOR, DRILL A 9MM HOLE