Big Snack Stadium
Print Profile(1)
Description
Here is a quite big snack stadium for your next Super Bowl party. It's 62 x 46 x12,5 cm big, but you could try to scale it down if you want it to be smaller.
There is a tolerance test rail in the print file (100% and 75%) and I strongly recommend that you print this first to check whether the rails can be moved easily.
There are holes in the bins where you ca put in small screws if it's too loose.
Note the picture for assembly. The parts interlock so you have to assemble the 7 parts first and the last 3 must be inserted in the way shown in the picture.
The field is glued together with the little crosses and the logos are glued to the field.
The field itself is just laid on the tabs, it's not secured. But you could use glue.
If you are not a fan of the patriots (which yould be strange ;-) ), you can add your favorite team on the blank logos.
Print it now, next Super Bowl is coming!
Boost Me (for free)
If you like it, please boost this model!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)