Search models, users, collections, and posts
Handheld Nerf Crossbow
IP Report
Print Profile(2)
V2: adaptive layer, 4 walls, 15% infill - Includes brim
Designer
3.6 h
1 plate
The bow is PETG, and on different plate
3.6 h
2 plates
Open in Bambu Studio
Boost
1290
3098
173
75
2.4 k
1.4 k
Released
Description
V2 Update:
- Made the front pegs thicker, and added mouse ear brim to make it easier to print
- Lengthened the puller and added a chamfer to make it shoot smoother
- Adjusted the wall between the spring and dart channel to increase travel distance.
A fun handheld nerf crossbow. Requires an elastic band.
Can be printed entirely in one go on an A1 Mini.
The Puller part sometimes needs to be run up and down the crossbow a few times to ensure it releases nicely.
As Several people have asked, below is a video on how to add the elastic band:
It is also possible to cut an elastic band and use only 1 strand, but it is weaker. (the little gripper at each end of the limb will hold the elastic band in place)
Documentation (1)
Assembly Guide (1)
Assembly.pdf
License
This user content is licensed under a
Creative Commons Attribution-Share Alike
Comment & Rating (173)