Print Profile(1)
Description
I have quickly designed printable balloon weights.
The ready-made ones available on Amaz.. were simply too expensive and too light. There are two printing plates. There is a 30-gram weight and a 20-gram weight. This is sufficient to prevent a medium-sized helium balloon from rising indoors. I printed the whole thing with 100% infill. With these settings, I had a printing time of just under 1 hour for both weights on one plate. I use ESun PLA+. For both weights together, I only use less than €1 in filament costs. With less infill, the whole thing becomes correspondingly lighter, for example for smaller balloons.
If you should use the whole thing outdoors, I would recommend printing the weights in PETG or ABS!
I look forward to feedback
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (14)