Smire3D

cover

IMG_1033.PNG

IMG_1034[1].PNG

IMG_1035[1].PNG

IMG_1036[1].PNG

IMG_1037[1].PNG

IMG_1038[1].PNG

plate_1.png

IMG_1081.PNG

Printat i PLA&nbsp;Nozzle 0.4&nbsp;Kvalite:lager höjd 0.2 mm &nbsp;Styrka:Antal väggar 2&nbsp;Hastighet:Första lager 30 mm/sFörsta lager ifyllnad 80mm/sYtter väggar 100 mm/sInre vägg 110 mm/sTopp yta 100 mm/s&nbsp;Hastighet vid överhäng:30 mm/s (25%, 50%)15 mm/s (50%, 75%)5 mm/s   (75%, 100%)&nbsp;Ingen support behövs!&nbsp;&nbsp;&nbsp;

Printed in PLA&nbsp;Nozzle 0.4&nbsp;Quality:Layer height 0.2 mm &nbsp;Strength:Wall count 2&nbsp;Speed:First layer 30 mm/sFirst layer infill 80 mm/sOuter walls 100 mm/sInner wall 110 mm/sTop surface 100 mm/s&nbsp;Overhang speed:30 mm/s (25%, 50%)15 mm/s (50%, 75%)5 mm/s   (75%, 100%)&nbsp;No supports needed!&nbsp;&nbsp;&nbsp;

0.2mm layer, 2 walls, 15% infill

Elsladd hållare 90 grader.&nbsp;<ul><li>0,4mm nozzle</li><li>Ingen support behövs&nbsp;</li></ul>&nbsp;

90-degree cable holder.&nbsp;<ul><li>0.4mm nozzle</li><li>No supports needed&nbsp;</li></ul>&nbsp;

Print Profile(1)

Description

Comment & Rating (4)

License

Related Models

E14 Cable holder

Print Profile(1)

Description

Comment & Rating (4)

License

Related Models