Li-Ion battery pack 6S 21700 FPV
Print Profile(1)
Description
I made a hardcase for a 6 cell Li-Ion battery.
The model consists of the case and lid, these are held together by 2 cable ties and 115mm wide heat shrink.
Its designed to protect the Li-Ion cells during FPV flying
The model is made for 6x 21700 cells. I personally have used the Molicel INR21700-P42A 4200mAh - 45A.
I point welded the cells together and soldered the balance cable and XT60 to the nickel strips. (Be careful when soldering Li-Ion cells. This can be dangerous. Make sure you know what you are doing.)
The model printed in Bambu basic PLA weighs 35 grams, consider a bamboo Aero Filament (PLA/ASA) for a lighter weight.
If you have any questions or comments, please feel free to contact me.
Boost Me (for free)
If you like my 3D-models, please consider leaving a boost.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)