Harmonic/ Strain wave drive with no backlash for Nema 17 Stepper Motor
Copyright Claim
Harmonic/ Strain wave drive with no backlash for Nema 17 Stepper Motor
Boost
30
30
3
Print Profile(1)
0.16mm layer, 2 walls, 15% infill
Designer
4.2 h
1 plate
Boost
30
30
3
0
53
12
Released
Description
A model of a harmonic gear with a ratio of 50 to 1, built with the future harmonic astrophotography mount in mind. Most of the parts were made of ASA, the flexline was made of TPU. The entire structure is fastened with M2 screws which are held in place with threaded inserts.
Bearings:
- 2x 61807 2RS ( 6807 2RS) 2RS 35x47x7mm bearing
- 2x 625RS 5x16x5mm bearing
Comment & Rating (3)
All
Hello beautiful parts I can not mount the bearings 625 because the diameter is pices print its 1mm larger. Dimension 6 it would take 5 for bearings 625 best regards
0
Reply
Nice
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld