Bambu A1 Rotary Spool Holder Adapter/ Tentioned holder Adapter and extender Remixed by o.0jack

Remixed by

o.0jack

3D Printer>3D Printer Accessories

GIF

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

1.6 h

1 plate

4.8(11)

Boost

Released

Description

Recommend PETG

Where a full/mostly full spool can unwind due to the gantry movement at the start of a print. The filament gets wrapped around the arm and then causes a jam.so you need tension holder prevent it.

The spring loaded tension holders can be bought separately from the ams, so you have a tentioned holder.

Caution:

After printing, please fold it first to see if it is strong.Bad and wet filament will be weak.

Clean the brim and put some greace on the thread.Will make your installation smoother.

NEED BUY AMS lite Rotary Spool Holder (yellow right side)(green left side)

https://store.bambulab.com/collections/accessories-for-a1-mini?page=3

Comment & Rating (19)

@Eldenroot

Print Profile

0.2mm layer, 2 walls, 15% infill

Thank you!

@infam0us

the threads don't seem to be right. won't screw in.

The designer has replied

@o.0jack

Clean the brim and put some greace on the thread.

@o.0jack

as shown in photo

@infam0us

Replying to @o.0jack :

ok i will try that. thanks

@silencespirit93

thanks for you model, it was really usueful for my project https://makerworld.com/en/models/147642#profileId-161076 needed to sand it just a littel bit the surface to let the rotary spool rotate just perfect

The designer has replied

@o.0jack

like your model

@silencespirit93

Print Profile

0.2mm layer, 2 walls, 15% infill

printed in PETG, it's perfect after a littel bit of sanding.

@aurora_destiny

great design, can you please tell me what is the diameter of the insert ? I would like to design my own thank you

@DudePT

Print Profile

0.2mm layer, 2 walls, 15% infill

thanks work nice

@adcdesign

Print Profile

0.2mm layer, 2 walls, 15% infill

Great model ! THX

@A_Visconti

It seems to me that it is only possible to use the yellow Rotary spoolholder (which rotates clockwise to feed the filament). The green Rotary spoolholder has a different attachment (it is not perfectly hexagonal). Can the adapter still be used? Thanks in advance.