Bottle Adapter for Can 0,33l / 0,5l
Bottle Adapter for Can 0,33l / 0,5l
Boost
119
159
40
Print Profile(5)
![[V1.1] Various Layers, 3 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/US91fb08a547807f/54627449/instance/2024-02-29_e540245a09525.webp?image_process=resize,w_100/format,webp)
[V1.1] Various Layers, 3 walls, 15% infill
Designer
56 min
2 plates
![[Single Plate byObject]0.12mm layer, 3 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/US91fb08a547807f/53851298/instance/2024-02-27_83bc6193e204e.png?image_process=resize,w_100/format,webp)
[Single Plate byObject]0.12mm layer, 3 walls, 15% infill
Designer
43 min
1 plate
0.15mm layer, 3 walls, 20% infill(Print by Object)
56 min
1 plate
a1 mini 0.12mm layer, 3 walls, 15% infill
1 h
2 plates
Click to see more
Boost
119
159
40
1
215
257
Released
Description
Bottle Adapter for Can 0,33l / 0,5l
Here it is….. the printable adapter to convert your can into a bottle!
- Snag fit for 0,33l / 0,5l Cans
- Good tightness tested with PLA & PETG
- Little latch to remove from can (Holds very strong)
- Integrated Thread with is compatible with most Screw Caps (2mm pitch)
- Printable Screw Cap on second Plate
It could be a little bit hard to push it on the can but that is important to get a good tightness.
It's recommended to print in PLA+ or PETG do not use Silk it will break to easy.
Have fun with the part 🍻 And don't forget to like and subscribe✔
Commercial license you can get here:
https://www.patreon.com/BamBamDesign/membership
Comment & Rating (40)
All
Print Profile
[V1.1] Various Layers, 3 walls, 15% infill
Other Issues:sadly print failed using the profile on here
The designer has replied
0
Reply
Thanks for review. Which printer and filament?
0
Reply
Replying to @BamBamDesign
a1 mini bambu pla basic. ive made a profile that ill upload in a minute of a modified 0.12 print that works perfect with a1 mini
0
Reply
ok all right 👍🏼
(Edited)1
Reply
Print Profile
[V1.1] Various Layers, 3 walls, 15% infill
Brilliant idea and for the most part is spill resistant. Love it and will use it constantly.
The designer has replied
1
Reply
Thank you for your review👍 The inner flat ring is a custom bring and should be removed 😉
(Edited)1
Reply
Replying to @BamBamDesign
:/). lol. I did remove it. using it this morning at work. :-).
0
Reply
Replying to @user_3508377020
😂😉
0
Reply
Print Profile
[V1.1] Various Layers, 3 walls, 15% infill
this was a fun print looks great thank you again
The designer has replied
1
Reply
You're welcome
0
Reply
Print Profile
[V1.1] Various Layers, 3 walls, 15% infill
Works perfectly! Nice snap tight fit.
The designer has replied
0
Reply
Perfect👍 Thank you for your comment.
0
Reply
What changes for red bull can?
The designer has replied
0
Reply
Is different, i rework and upload. Follow for be infomed
0
Reply
https://makerworld.com/en/models/214483
1
Reply
Replying to @BamBamDesign
thank you very much
0
Reply
Print Profile
[V1.1] Various Layers, 3 walls, 15% infill
printed great first time. Verified seal by putting on a can of Coke and it did not leak. Great job
The designer has replied
1
Reply
Thank you very much for your comment 👍🏼
0
Reply
Do you have one for 12oz can?
The designer has replied
0
Reply
Should fit?
(Edited)0
Reply
Can you proove?
0
Reply
Print Profile
[V1.1] Various Layers, 3 walls, 15% infill
very useful, printed it in petg
1
Reply
Print Profile
[V1.1] Various Layers, 3 walls, 15% infill
Cool idea! But had a bit of leaking when finished drinking...so not really an issue with the print, but rather with the design itself
0
Reply
It is because your filament is not water resistant.
0
Reply
Print Profile
[V1.1] Various Layers, 3 walls, 15% infill
sauber
1
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (1)
Related Models
© 2024 MakerWorld