Cute figure of sleeping bear by Sam HellMyth

Sam HellMyth

Miniatures>Animals

Print Profile(3)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

4.4 h

1 plate

4.2(23)

With Tree Support, Lower Speed, P1S

4.7 h

1 plate

4.7(6)

Stronger cloud pillow 0.12mm layer, 3 walls, 10% infill

2.7 h

1 plate

Boost

359

513

1.1 k

213

Released

Description

Cute miniature statue of sleeping bear

Can be printed Single and Multi color

If you have single color printer you still able to print multicolor, just need print separate figure of bear and snow pillows

If you printed bear separately you need to use supports at the bear belly :0)

If you like cute bears check my other more complicated and cool assembled model of bear flying on balloon

https://makerworld.com/en/models/230355

multi color if you want

miniature

Comment & Rating (40)

@Brossj

Print came out great except for 2 things: 1 the eyes didn't come out black but they were painted black in bambu studio. And 2 what do I need to change to fix the the lines it made on each layer it used black. It's like the prime or purge needs to be higher.

The designer has replied

@HellMyth

Hi, Yes most people prefer just paint such small details like eyes and nose, because is tons of waste for such small details

@SIR_PRINTSALOT

Print Profile

0.2mm layer, 2 walls, 15% infill

printed beautifully

@eduardogodoypla

Print Profile

With Tree Support, Lower Speed, P1S

beautiful print unfortunately the stem base that holds the bear sleeping appears to be very thin in the base and it’s going to break very easily if I give it to my grandkids to play with it.

@user_3448390344

Print Profile

0.2mm layer, 2 walls, 15% infill

Super cute print. First attempt with AMS and without support failed. Second attempt I separated the bear and the clouds and came out really nice, especially the clouds are awesome 🤩 will definetly try without support and AMS again soon.

@feli.brockmann

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_2951696347

Lovely!

@MisterNCN

Does this need support?

The designer has replied

@HellMyth

Hi, bear needs supports only when you print him separately. If you print multicolor version o single color version it doesn't need supports

@Jayden

Print Profile

0.2mm layer, 2 walls, 15% infill

did work but needed supports to prevent drooping

@user_545474233

Print Profile

0.2mm layer, 2 walls, 15% infill

good print no issues

@ALPHA004

Print Profile

0.2mm layer, 2 walls, 15% infill

il pezzo si è staccato dal piano

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(3)

Description

Comment & Rating (40)

License

Related Models

3in Hoodie Bear

Sleeping Dog

Bear keychain

Cute figure of bunny infiltrator flying on balloon