Heyho :)


I use perforated plastic bags to make my own tempeh. You can also buy these bags, but they are quite expensive. With this simple help you can evenly punch holes in your bags yourself. Depending on how many holes you want, you can repeat the process slightly offset.

In addition to the printed part you will need:

Toothpicks with a radius about 3 mm.

Optional: 2 x M4 Screws if you want to mount the handle ( I did not test that yet xD)
Optional: 4 x 4mm Wooden Screws if you want to mount the plate to a piece of wood.

Cutting Jig:
There is a Jig implemented to cut all the toothpiece parts to the same length. Insert the toothpicks with the tip first into the jig and cut them flush at the entry.
 

The openings are designed to compensate for a tolerance between the different toothpicks. They should go in all the way but sit quite firmly.