Hatched from the Egg for Ballpoint Pen Spring
Hatched from the Egg for Ballpoint Pen Spring
Print Profile(2)
![[Single Color] 0.2mm layer, 3 walls, 10% infill](https://makerworld.bblmw.com/makerworld/model/US909c4e7500944e/60072711/instance/2024-03-18_17c292e242595.gif?image_process=resize,w_100/format,jpeg)
![[Simple 3Colors] 0.2mm layer, 3 walls, 10% infill](https://makerworld.bblmw.com/makerworld/model/US909c4e7500944e/60072566/instance/2024-03-19_5d3fdcdfac651.png?image_process=resize,w_100/format,webp)
Description
Jumping Eggshell - Hatched from the Egg
Version without Spring and bigger compartment check this:
https://makerworld.com/en/models/384581
A great Easter Egg with a jumping Eggshell! Great gift box or use as a fidget toy. 👍
Simple functional print. Press the top eggshell with the clamp in the bottom eggshell to load.
Press the egg on the table (on the bottom is the release button) and the upper shell jumps in the air.
But be careful it can jump really height!
Assembly:
- Insert the clip into the slots from the upper shell and press it all the way in.
- Place the tube in the bottom eggshell
- Clip the shells together
You have the opportunity to insert springs from a ballpoint pen in the four holes. 
Cut them in half, 10mm -15mm length are enough.
I tested with one spring cutted in 2 and it fly really height.
Have fun! 😉 Don't forget the virtual handshake 👍🏼
Happy Printing!
Commercial license you can get here:
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Related Models
