This model requires some hands-on ability, please consider carefully before printing!!

Required materials:

1. Rubber bands or ropes

2. A short section of PLA Filaments

3. glue

Installation steps:

1. Print the model and remove the support, which may require some tools and may be difficult to remove

2. Use rubber bands or ropes to connect the box cover to the rotating shaft

3. Drill a 2mm diameter hole on the buttocks of the model spider to insert Filaments

4. Measure the appropriate length of consumable wire according to the placement of the reference image

5. Use Filaments silk to connect the spider's buttocks and rotation axis，and fix them with glue

6. Test and adjust the length of consumable wires to ensure normal operation

这个模型需要一定的动手能力，请考虑仔细再打印！！
需要的材料：
1.橡皮筋或者绳子
2.一小段PLA耗材，柔韧性要好
3.热熔胶枪

安装步骤：
1.打印模型，并拆除支撑，这可能需要一些工具，拆除比较困难
2.用橡皮筋或者绳子，链接盒盖与转动轴
3.在模型蜘蛛的屁股上，钻一个直径2毫米的洞，用来插入耗材
4.参考图片摆放的位置，量取合适长度的耗材丝
5.用耗材丝连接蜘蛛屁股和转动轴
6.测试调整耗材丝的长度，确保运转正常