Spin Cube (Print in Place) 0.2mm nozzle by untiedlaces

untiedlaces

Hobby & DIY>Other Hobby & DIY

In Contest

0.2mm nozzle Design Challenge

Print Profile(3)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

2.3 h

1 plate

4.4(36)

Adjust parameters for quick production

43 min

1 plate

4.4(17)

0.2mm layer, 2 walls, 15% infill

2.6 h

1 plate

3.0(6)

Boost

411

663

115

1 k

647

Released

Description

How to use your Spin Cube:
https://www.youtube.com/shorts/gF6f5rRcD6E

FOR 0.4MM NOZZLE PRINT AT 150% SCALE

{Description}

The small size and short printing time make it ideal for trial 3D printing.

Print flat on any given face of the cube.

Print in Place with supports.

Print at 30mm/s maximum.

Please take pictures of your Spin Cube and share them with us!

⚠Warning⚠

Be careful in environments with young children and pets!

This model contains small parts.

If not properly stored in an environment with young children or pets, it may lead to accidents such as accidental ingestion or injury.

If infants or pets are present, please take appropriate measures depending on the situation, such as refraining from 3D printing or storing in an appropriate place.

Do not apply strong force!

Applying strong force to a 3D printed model or throwing it may damage the model and lead to accidents such as injuries.

In addition, debris from damage to the model may be accidentally ingested by infants or pets.

If the model is damaged, dispose of it immediately.

Store them in an appropriate place.

After 3D printing, store the model in an appropriate place out of reach of young children and pets.

Proper adherence to the precautions will ensure the safe use of the model.

Comment & Rating (115)

@JoeMama27

Print Profile

0.2mm layer, 2 walls, 15% infill

Profile does not work due to the designer making the tolerances for a 0.2mm nozzle. Do not print this with any other nozzle size Edit: profile has been updated to print with a 0.2mm nozzle, image is still of the 0.4mm print. profile is unverified by yours truly

(Edited)

The designer has replied

@untiedlaces

I apologize for any confusion, but i will but 0.2mm in the title

@Printyourself

Boosted

Both print profiles are for .2mm nozzles, if you hover over it it should tel you that.

@JoeMama27

Replying to @untiedlaces :

My intention was to call out this profile. At the time of printing, it was labeled as and sliced for a 0.4mm nozzle. Your model seems to be well designed, I've just not had the gap between projects yet to swap nozzles. Your communication on the model page and designer profile was very clear about the 0.2mm nozzle already :)

@moonrakerone

Print Profile

0.2mm layer, 2 walls, 15% infill

Fused solid on a .2 nozzle

(Edited)

The designer has replied

@untiedlaces

When you print with a 0.2mm nozzle don’t print at reg/full speed print at 30mm/s or so , that is what yielded the best results for me.

(Edited)

@moonrakerone

Replying to @untiedlaces :

I printed unmodified from your profile

(Edited)

@untiedlaces

Replying to @moonrakerone :

But the speed would make the difference, my model says explicitly 30mm/s or under for the speed of the print. I myself don’t directly own a bambulab printer my uni and school does, for the most part I use ender 3 or ended 3 pro, so I do apologize if I may have caused any problems with the print, if there are any recommendations that i could make to my print profile please let me know, I am trying to learn the closed nature of bambulab ecosystem. Once again I apologize if I caused any problems🥲

(Edited)

@paravane

Nice little fidget toy. Didn't read the instructions and printed it with a .4 nozzle first and it did NOT work. Read the print instructions and it came out great with the given instructions and a .2 nozzle. Would love a version where the interior was a different color.

(Edited)

The designer has replied

@untiedlaces

With a 0.4 nozzle the sides ended up melting/sticking together, if you did want to use 0.4 you would have to over extrude and it may POSSIBLY work. I haven’t tried that though.

@untiedlaces

I will try to make the interior a different color but i think there might be an issue where the walls stick from heavy stringing

@user_2916348676

not happy with it :/ I printed with 0.2mm nozzle and printed from the uploaded design file. it won’t spin and seems stuck together. good idea tho for a spinner

The designer has replied

@untiedlaces

Did you print at the slow speed

@DDLprint

Print Profile

Adjust parameters for quick production

Goet

The designer has replied

@fancyage

Thank you for your reply

@kstudioca

Doesn't work, fused with 0.2 nozzle. I see why here: Screenshot this part just print on top another part where it should not be fused. Outside part just print mid-air falling off.

(Edited)

The designer has replied

@untiedlaces

I'm not gonna lie, i am not that experienced with the Bambu lab slicer or program, i think the best option would be to use @fancyage print profile, i don't know what he did but his works really good, i think it may be the layer height i am not sure though.

@Jackser

This is an old model of yours and couldn't even enter the contest. This is called unfairness https://www.thingiverse.com/thing:6246656

The designer has replied

@untiedlaces

I know, I have my profile linked but the maker world contest rules stipulate that they mush not be uploaded on the website, even if I get disqualified I am fine with it as I don’t directly need the gift card. I do this only in passion so it would make sense for somebody else to win anyway

@joewilson09

Print Profile

0.2mm layer, 2 walls, 15% infill

good

@Belgos

Print Profile

0.2mm layer, 2 walls, 15% infill

(Edited)

The designer has replied

@Printyourself

Boosted

Das liegt daran, dass dieses Druckprofil für eine 0,4-mm-Düse gilt, während dieser Druck normalerweise mit einer 0,2-mm-Düse erfolgt. Ich konnte es mit einer 0,4-mm-Düse bei niedriger Geschwindigkeit drucken und dann mit einem Messer um den Würfel herumführen, und jetzt funktioniert es bei mir. Wenn Sie möchten, dass es sich leichter dreht, müssen Sie eine 0,2-mm-Düse verwenden

(Edited)

@untiedlaces

Replying to @Printyourself :

In der Einstellung sagte ich 0,2 Original. Ich entschuldige mich, wenn sie nicht klar waren 🥲

(Edited)

@Printyourself

Boosted

Replying to @untiedlaces :

No no you were plenty clear and I understood, I was able to print it under .4 mm and just seperate it and it worked for me so I made a print profile. I was just letting Belgos know why it might've not worked for him. Maybe I should take my print profile down if it's not useful to others.. I love your model though, thank you! Nein, nein, Sie haben es völlig klar ausgedrückt und ich habe es verstanden, ich konnte es unter 0,4 mm drucken und es einfach trennen, und es hat bei mir funktioniert, also habe ich ein Druckprofil erstellt. Ich habe Belgos nur wissen lassen, warum es bei ihm möglicherweise nicht funktioniert hat. Vielleicht sollte ich mein Druckprofil löschen, wenn es für andere nicht nützlich ist. Ich liebe Ihr Modell, danke!

(Edited)