The Catch Lid: Capture and explore insects...

Copyright Claim

The Catch Lid: Capture and explore insects...

Boost
18
13
5
GIF
GIF
GIF
GIF
GIF

Print Profile(1)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
27 min
1 plate
5.0(2)

Boost
18
13
5
3
10
10
Released

Description

The Catch Lid: Capture and explore insects effortlessly with this innovative lid!

 

If a spider has wandered into your living room, there's no need to panic! Simply catch it with The Catch Lid, safely transport it outside, and set it free. Or perhaps you'd like to explore the fascinating world of local insects in your own garden? With The Catch Lid, you're well-equipped! This innovative lid can be easily attached to a drinking glass with a rubber band and is ready for use in no time.

 

Position The Catch Lid with the slats centered over the insect you wish to capture, ideally on a flat surface. The insect will attempt to free itself from the gently pressing slats and will autonomously crawl under the lid and into the glass. If necessary, the glass can be lightly rotated to aid the process. Once the insect is safely trapped, you can flip the glass over and transport the insect outside to release it into the wild. Alternatively, you can begin studying it immediately before setting it free again.

 

The slats are particularly gentle on the insect and allow for the capture of insects of various sizes. Whether it's spiders, cockroaches, mosquitoes, or wasps, The Catch Lid captures them all in no time.

 

Technical specifications:

 

Drinking glass with an opening diameter of 68 mm to 83 mm

Rubber bands: 1.5 mm width and approximately 75 mm diameter depending on the drinking glass

Insects ranging from 2 mm to 30 mm in size

 

### Deutsch ###

 

The Catch Lid: Fang und erkunde Insekten mühelos mit diesem innovativen Deckel!

 

Wenn sich eine Spinne in deinem Wohnzimmer verirrt hat, kein Grund zur Panik! Fang sie einfach mit The Catch Lid ein, trag sie sicher nach draussen und lass sie in die Freiheit. Oder möchtest du die faszinierende Welt der heimischen Insekten im eigenen Garten erkunden? Mit The Catch Lid bist du bestens gerüstet! Dieser innovative Deckel lässt sich im Handumdrehen mit einem Gummiband an einem Trinkglas befestigen und ist sofort einsatzbereit.

 

Platziere The Catch Lid mit den Lamellen einfach mittig über dem zu fangenden Insekt, idealerweise auf einem flachen Untergrund. Das Insekt wird versuchen, sich von den sanft andrückenden Lamellen zu befreien und läuft dabei selbstständig unter den Deckel direkt ins Glas. Gegebenenfalls kann das Glas leicht gedreht werden, um den Vorgang zu unterstützen. Sobald das Insekt sicher gefangen ist, kannst du das Glas umdrehen und das Insekt nach draussen tragen, um es in die Freiheit zu entlassen. Oder beginne sofort mit der Erforschung, bevor du es wieder freilässt.

 

Die Lamellen sind besonders schonend für das Insekt und ermöglichen es, Insekten verschiedener Grössen zu fangen. Ob Spinnen, Schaben, Mücken oder Wespen, The Catch Lid fängt sie alle im Handumdrehen.

 

Technische Daten:

 

  • Trinkglas mit einer Öffnung von 68 mm bis 83 mm Durchmesser
  • Gummibänder: 1.5 mm Breite und ca. 75 mm Durchmesser je nach Trinkglas
  • Insekten von 2 mm bis 30 mm Grösse

 

 

The Catch Lid ### Designed by GmD in Switzerland

Comment & Rating (5)

Please fill in your opinion
(0/5000)

Hallo - wäre es nicht cool die Lamellenfalle gleich mit einem kleinen Gewinde auszustatten, um auf ein Joghurtglas zu passen? Also ohne Gummiringe?!
The designer has replied
1
Reply
Hallo, Downloader nützlicher Dinge :-). Das ist eine gute Idee und würde das Produkt schön abrunden. Nur welches Gewinde genau? TO 63, TO 70, TO 82 oder TO 100? Oder doch etwas Englisches? Mein erster Prototyp war ein Formschluss für ein IKEA Glas, weil ich dachte, dieses Glas hat jeder Zweite zu Hause. Mein Feldversuch zeigte aber schnell, dass ich der Einzige mit diesem Glas bin. Also war schnell klar, etwas Universelles muss her. Und voilà - mit den Gummibändern geht das super...
2
Reply
Wow! What a wonderful creation! 👏👏👏
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
No more