Twist lock container | No supports
Copyright Claim
Twist lock container | No supports
Boost
583
910
200
GIF
Print Profile(10)
0.16mm layer, 2 walls, 20% infill
Designer
3.3 h
1 plate
0.16mm layer, 2 walls, 15% infill
3.9 h
1 plate
![[Fast+Clean] 0.24mm layer, 2 walls, 15% gyroid infill](https://makerworld.bblmw.com/makerworld/model/US16dd25c7182d17/68803317/instance/2024-04-17_55f29436b619f.jpg?image_process=resize,w_100/format,webp)
[Fast+Clean] 0.24mm layer, 2 walls, 15% gyroid infill
2 h
1 plate
0.24mm layer, 2 walls, 15% infill
2.4 h
1 plate
Click to see more
Boost
583
910
200
85
1.4 k
1.1 k
Released
Description
Twist lock container to keep your items secure, perfect in your car, bathroom or when traveling.
The top screws and locks into place with a very satisfying click sound.
The model has tight tolerances and might be hard to turn the first couple of times. After a few times it will run smooth.
No supports needed.
Check out the smaller version below, perfect when traveling.
https://makerworld.com/en/models/413689#profileId-318275
Comment & Rating (200)
All
Print Profile
0.16mm layer, 2 walls, 20% infill
scaled 50% down and works perfect
The designer has replied
3
Reply
Awesome, thanks for the post. Which print bed do you use?
(Edited)1
Reply
Replying to @Rikskeff
IdeaFormer Doppelseitige PET+PEI... https://www.amazon.de/dp/B0CJ2H1BSJ?ref=ppx_pop_mob_ap_share
this is my printplate
(Edited)1
Reply
Replying to @Clay2F
Thank you bud!
(Edited)1
Reply
super dose 👍👍👍👍
The designer has replied
2
Reply
love the top layer
1
Reply
Nice. How'd you do the top like that?
0
Reply
Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill
very good
1
Reply
Which filament is it? I really like the color
(Edited)1
Reply
Boosted
It's the Bambu PLA basic gold!
0
Reply
Works great! I printed one normal PLA matte grey and one Silk PLA 20% larger.
The designer has replied
2
Reply
Looks great! Thanks for the post 😃
0
Reply
Print Profile
[Fast+Clean] 0.24mm layer, 2 walls, 15% gyroid infill
Printed perfect in PETG
The designer has replied
1
Reply
Nice color change 👍🏻 Thank you for your review!
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
The profile is very consistent. I printed at %150 for the gold container.
1
Reply
Awesome, thanks for posting!
0
Reply
Petg-Cf, paused it to add a plexiglass window (top and botttom)
1
Reply
Print Profile
52MM HEIGHT x 34MM OD ~PLA~ 0.2mm layer, 2 walls, 15% infill
👌
The designer has replied
0
Reply
Boosted
thanks!
0
Reply
Print Profile
0.16mm layer, 2 walls, 20% infill
Thanks
1
Reply
Print Profile
[Fast+Clean] 0.24mm layer, 2 walls, 15% gyroid infill
nice and big, has grippy material on the side. printed on standard speed
The designer has replied
0
Reply
Thank you for your review!
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Share AlikeRelated Models
© 2024 MakerWorld