Classic bird feeder house with mounting bracket.
Boost
331
392
32
Print Profile(4)
0.16mm layer, 3 walls, 25% infill(strong)
Designer
23 h
4 plates
0.16mm layer, 2 walls, 15% infill(fast)
Designer
19.2 h
4 plates
0.16mm layer, 2 walls, 15% infill
15.8 h
5 plates
0.16mm layer, 3 walls, 25% infill
27.7 h
6 plates
Boost
331
392
32
37
301
93
Released
Description
Classic bird feeder house with mounting bracket | By Techro3D
- Water drainage.
- Mounting bracket.
- Suspension point for a fatball or other bird food.
- Bottom also suitable for placing food.
- Removable roof.
- 100% printable.
- No glue required, but can be used just to be sure.
Comment & Rating (32)
All
Boosted
Great design, fits well and really good that you can take the house off for easy cleaning.
Only thing i had was windows didn't fit and printed them again with height of 119mm instead of 120mm. Fitted nice after that. Might be due to use of materials. I used eSun Pla+ army green and eSun Pla matte black as materials.
Maybe a small barr/step for the birds to land on as an optional attachment?
(Edited)
The designer has replied
3
Reply
thank you very much.
Oh that's strange, for me I could press them in straight away.
nice photos by the way!
Nice idea, I'll see what I can make :)
0
Reply
Replying to @Techro3D
Did you ever make the step for birds to land on? Awesome design by the way!
0
Reply
Made it to protect my security camera from the elements. Came out so good I might make another for the birds lol
4
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill(fast)
printed in ASA.
first i had some trouble with warping but was able print after some adjustments.
awesome design. thanks for sharing :-)
(Edited)
1
Reply
what adjustments did you make? looks good
0
Reply
Replying to @Mehness
ASA printed on P1S - set bed temp to 100°C, cover up all holes, especially the poop chute, preheat the chamber at least 20min or longer, disable all fans in settings, let everything cool down before printing the next part. don't rush! and always, always keep the printer closed during the entire process!
(Edited)0
Reply
Boosted
Printed at 80% scale on the A1 Mini, everything fit perfectly, I just had to superglue the windows. Thank you for the great model.
2
Reply
Boosted
Printed in ASA and they are awesome!
2
Reply
Boosted
Print Profile
0.16mm layer, 3 walls, 25% infill(strong)
Awsome
1
Reply
Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill(fast)
Awsome
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
buena calidad, gracias
1
Reply
Boosted
Print Profile
0.16mm layer, 3 walls, 25% infill(strong)
Very nice print. Thank you for such a great file.
1
Reply
Boosted
I like a lot the design´s from you. Because of this i want to give you this boost. I hope that comes more models like this.
With best regards cblab
The designer has replied
2
Reply
thank you, I'll try my best to make more designs.
0
Reply
License
This work is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Related Models
© 2024 MakerWorld