50 Different Dog Breed Coasters by Mr.Jay

Mr.Jay

Household>Pets

In Contest

Animal Frenzy

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.28mm layer, 2 walls, 15% infill

Designer

28.6 h

15 plates

4.9(14)

0.28mm layer, 2 walls, 8% infill - A1 mini 1/2

29.7 h

36 plates

5.0(1)

0.28mm layer, 2 walls, 8% infill A1 mini 2/2

7.4 h

9 plates

5.0(1)

Boost

359

435

690

155

Released

Description

Dog coasters of a lot of breeds.

I made these coasters with existing designs in Fusion 360. They print easy with Bambu Studio. The top side of the coasters is laying flat on the printbed, so the top gets a nice finish (textured or smooth) and there is not much waste in plastic.

The size of the coasters is 10cm. I don't recommend to scale them down, because the details on the design will not print well. However they can be scaled up to make a nice ornament on the wall.

If you print them in PLA, please be aware of putting hot drinks on them and don't put them in the dishwasher. If you want to put hot drinks on them, it's better to print them in PETG or ASA.

The profile contains all the coasters I made until the end of April. After that I got much more requests of dog breeds and they can be found in my Dog Coaster collection.

You can message me to add a request if you miss a breed, but I don't have all breeds. I did not make the designs of the dog breeds myself and I cannot make them from photo's.

List of breeds:

American bulldog
American Staffordshire Terrier
Australian Cattle Dog
Basset hound
Beagle
Bernese Mountain Dog
Bordercollie
Boxer
Bulldog
Cane Corso
Cavalier King Charles Spaniel
Chihuahua
Cocker spaniel
Dachshund
Dalmatian
Doberman Pinscher
English bull terrier
English Bulldog
English Foxhound
English Sheepdog
french bulldog
German Shorthaired Pointer
German sheppard
Goldendoodle
Goldenretriever
Great Danish
Greyhound
Jack russel
Keeshond
Labrador retriever
Lhasa Apso
Miniature Schnauzer
Nova Scotia Duck Tolling Retriever
Pekingese
Pembroke Welsh Corgi
Pomeranian spitz
Puggle
Rottweiler
Rough collie
Samoyed top down 0.2mm nozzle
Shiba Inu
Shih Tzu
Riberian husky
Yorkshire terrier

Comment & Rating (61)

@Scully64

it’s be great if you were to name them so that we could choose which dog to print. they print out so well, clean and fast. thanks.

The designer has replied

@Mr.Jay

Hello, If you go to objects you can see the names of the breeds. Or you can go yo my collection where you can download individual breeds.https://makerworld.com/en/@Mr.Jay/collections/190167

@Scully64

Replying to @Mr.Jay :

thanks

@ESPN8_TheOcho

Print Profile

0.28mm layer, 2 walls, 15% infill

fun idea. I'd love to see a rat terrier option to print a set for my parents. they turned out nicely. thanks!

The designer has replied

@Mr.Jay

Was it attended to print them in negative? Sorry, I don't have a design of a rat terrier to make it into a coaster.

@ESPN8_TheOcho

Replying to @Mr.Jay :

yes, i wanted the majority of the coloring to be black so i inverted the colors!

@user_1941064690

WOW, cool ideal, but I miss the smooth Collie ;-)

@Garcy99

Print Profile

0.28mm layer, 2 walls, 15% infill

Printed this good boi I love him

@daviddavies5152

Print Profile

0.28mm layer, 2 walls, 15% infill

needed to change the layer height from .28 to .16 to get good quality

@MagnetDanny

Print Profile

0.28mm layer, 2 walls, 15% infill

Arrrrroooo-woof-woof-arf-arf-bark-bark (thank you)

@user_2338940361

thanks, but I tried plate 19 (dachshund) and for me it is not possible to print it with a A1 mini properly with a 0.4mm nozzle without gaps. Even with a 0.2mm nozzle I have to scale it 150% to slice it without gaps. But than it takes "ages". I think there are too much detail in it. Kind regards

The designer has replied

@Mr.Jay

Hello, sorry the print was not succesfull. I printed mine on a A1 (not mini) with 0.4mm nozzle and it came out good. Here is a picture of my print. So I don;t know why your prints are faling. Maybe you need to calibrate your printer?

(Edited)

@user_2338940361

Replying to @Mr.Jay :

thank you for your feedback. My fault was, that I printed the plate with "Wall generator" in "Classic" and not in "Arachne" mode, but even in "Arachne" mode there are a lot of small gaps/holes in the first layers. Kind regards

@Mr.Jay

Replying to @user_2338940361 :

Yes in Bambu studio you see gaps, but they are not visible when you print it. You have to print them with Arachne on, that is what is set in my profile.