Mom mandala - mothers day gift by Just_Josh

Just_Josh

Art>Other Art Models

Print Profile(6)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.24mm layer, 2 walls, 5% infill

Designer

5.6 h

1 plate

4.9(83)

0.24mm layer, 2 walls, 2% infill - New with alt layer 2

Designer

18.3 h

9 plates

5.0(2)

50% Amazing mom - 0.24mm layer, 3 walls, 5% infill - A1 mini

2.7 h

1 plate

5.0(24)

0.24mm layer, 2 walls, 5% infill

5.7 h

6 plates

5.0(1)

Click to see more

Boost

697

844

186

1.5 k

932

Released

Description

*I received a request to do a version without a baby. I have added a new profile with the original mom/baby but now there is also a mother with an older child silhouette. I also have versions with all layers combined (using supports) or split onto individual plates so they can be printed and combined.

A nice mothers day mandala for the mothers in your life. This prints fairly quickly and it is easy to change the color for each layer as each of them are distinct objects in the assembly. Supports are needed but I was able to remove all of them in around 3-5 minutes. Some could possibly remain and not be seen if you aren't picky.

If you like what you see please check out my other work https://makerworld.com/en/@Just_Josh

Comment & Rating (186)

@Faz56710

Boosted

Print Profile

0.24mm layer, 2 walls, 5% infill

I printed the layers separately and then glued them together to avoid supports. I ran into a small problem since layer 6 has four pegs (one in each corner) and layer 5 has only one hole for the pegs (as you can see in the photo), so what I did is I stopped the print of layer 6 just before it started printing the pegs. Otherwise fantastic print, thank you so much. I enjoyed printing it and I’m sure my mother in law will love it.

(Edited)

@negronmiguel197

How did you print them separately?

@Daandebanaan

Could you please share the files of the seperated model? I'm having trouble doing it myself.

@Faz56710

Boosted

Replying to @Daandebanaan :

Hey unfortunately I’m not home since we’re visiting my mother in law. I will share them but next week. if you need to print it before then, what I did is, I downloaded and opened the .3mf file in Bambu studio, selected objects instead of global from the left side. Then select Plate 1 and MomCorrected. From the list delete all the layers except the one you want to print. Repeat for all 6 layers. Keep in mind that before you send to print layer 6 to pause it just before the pegs start to print, i.e. as soon as layer 18 starts. Good Luck.

(Edited)

@user_3619441378

Print Profile

0.24mm layer, 2 walls, 5% infill

excellent print. still need to remove supports but it looks awesome

The designer has replied

@user_586713768

Looks nice. I like the color combo. Mind telling me the colors used? Thanks

@user_3619441378

Replying to @user_586713768 :

thank you, it was all numakers pla. atomic pink, teal blue, white, and grass green.

(Edited)

@Just_Josh

Love this, you have a better cir palette than me!

@JnR3D

Print Profile

50% Amazing mom - 0.24mm layer, 3 walls, 5% infill - A1 mini

Was hard to get all the supports off but it turned out beautifully. I included the back before all of it was off then after all of it was off. I think it turned out great.

@Just_Josh

Looks great, I tried to use support settings that were easier to remove.but there was only so much that could be done. Thanks for the feedback!

@JnR3D

Replying to @Just_Josh :

You did amazing I can't wait to learn how to do all of the things. This was only my second print and turned out amazing! I love it. Thank you for sharing your art.

(Edited)

@Sheepwiithme

Boosted

I like tree supports. they seem to be the easiest to get off

(Edited)

@curiositybitest

Boosted

my print

The designer has replied

@demonoid369

Boosted

how did you get such clean support removal?

@curiositybitest

Boosted

Replying to @demonoid369 :

wasn’t real hard just takes time.

@Just_Josh

Good job, I tried to minimize the support removal pain but I know it's still a chore. (I used needler nose pliers for mine)

@user_4166453894

Print Profile

0.24mm layer, 2 walls, 5% infill

End results looks great and only had an issue with the single print. Plate 5 is missing 3 of the 4 locating holes for plate 6. Drilled holes into it plate 5 and everything fits.

The designer has replied

@Just_Josh

I didn't even realize I had uploaded the one with alignment holes. It wasn't intended, I ran out of time to get them all done so I was going to upload a version with every layer flat. I'll set it to private until I can get home and upload that. Thanks for the heads up.

@user_4166453894

Replying to @Just_Josh :

More of a heads up if someone wanted to print. Great print!!!

@joshf128

Boosted

Print Profile

0.24mm layer, 2 walls, 5% infill

@cadjeremy

Posting with your logo that leads to the etsy link selling these for $12 each is a little risky.

@AAAadditives

I think the license allows for commercial use with attribution? But yea, I wouldn't have done that either lol

@joshf128

Boosted

Replying to @cadjeremy :

license allows for commercial use. nothing to be ashamed of here. thanks for the traffic to my shop though!

(Edited)

@SnosageBeefTips

This was a great print. My wife loves it. Took me a good 15 min to take off the supports but that’s just the nature of the beast. A good set of needle nose pliers helped. For some reason my camera makes the print lines really pop but it looks a lot better in person.

(Edited)

The designer has replied

@Just_Josh

Yeah I did add a new version that can be printed one layer at time and assembled but I personally prefer dealing with the supports vs babysitting 6 prints.

@user_3353882953

looks great!