Burj Khalifa by vandragon_de

vandragon_de

Miniatures>Architecture

Print Profile(4)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

15.8 h

1 plate

4.5(22)

0.2mm layer, 2 walls, 15% infill , Gyroid Infill

17.2 h

1 plate

4.8(6)

[lighter and faster]0.28mm layer, 2 walls, 10% infill

12.3 h

2 plates

5.0(1)

0.2mm layer, 2 walls, 15% infill

13.8 h

1 plate

Boost

144

248

731

256

Released

Description

As the largest building in the world, I also wanted to include it in my collection. There are already some models, but I thought I'd give it a try. In the end, it wasn't quite that easy.

In 1:1000, the tower is already quite considerable in size

Printer setting

Extrusion width (over all): 0.4
Perimeter generator: Classic

Support:

Only required below the main entrance roofs at Part 1.

Notes:

The connections might be a little too big, but that depends on the printer. Otherwise, either glue or put some tape around the individual connectors to give them a better fit.

Comment & Rating (37)

@Themisto

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed in X1C using matte PLA. the model is very detailed. there are small overhangs that did not prrint correctly (see image), but overall looks very well. Assembles easily. the model is very tall when assembled, 33.75” tall. banana for scale.

The designer has replied

@vandragon_de

Thanks for showing us, regarding the support, yes unfortunately this is necessary in the entrance area. That's why I mentioned this in the text. Nevertheless, very nice.

(Edited)

@user_2813405899

I try use A1 mini putin it, good lucky for me!

@ZekeSli

was the final result OK?

@user_2813405899

Replying to @ZekeSli :

good！

@marccc_kerrr

Print Profile

0.2mm layer, 2 walls, 15% infill

Prints amazing! but the brim doesn’t seem necessary on the larger peices

@Nashvillefunk

Print Profile

0.2mm layer, 2 walls, 15% infill , Gyroid Infill

had a blast with this one

@emikalchev

Print Profile

0.2mm layer, 2 walls, 15% infill

Extremly detailed model. I had no problem printing it.

@ypdegott

Print Profile

0.2mm layer, 2 walls, 15% infill

@tomy03ful

Print Profile

0.2mm layer, 2 walls, 15% infill

(Edited)

@lord_endy

very good mine came about 40 in tall

@user_4008126476

Cool

@jeffreyvrosch

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

nicely detailed and print prefectly

@zan.bacak

Print Profile

[lighter and faster]0.28mm layer, 2 walls, 10% infill

Looks amazing but lacks SUPPORTS ON THE ENTRANCES. No brim necessary if printed with PLA on the Smooth PEI Plate

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Burj Khalifa

Burj Khalifa

Print Profile(4)

Description

Comment & Rating (37)

License

Related Models

Burj Khalifa

Burj Khalifa

Burj Khalifa

Burj Khalifa Strawberry Pot