A1mini外挂料架External material racks
Remixed by
Copyright Claim
A1mini外挂料架External material racks
Remixed by
Boost
83
186
30
Print Profile(1)
A1mini料架
Designer
4 h
2 plates
Boost
83
186
30
1
563
102
Released
Description
Comment & Rating (30)
All
nice,
2
Reply
hola donde conseguiste el archivo para el soporte de bobina superior de A1 mini, no lo encuentro.
0
Reply
Replying to @Joselu1979
https://makerworld.com/en/models/90794
0
Reply
我打印出来遇到了两个问题：
1.中心轴间隙几乎等于0，塞不进；
2.三个爪子，即使点胶水，因为没有设计限位很难控制一致，另外弧度和匹配面不一致，胶水放了粘不住；
综上我看你视频里很流畅，是不是文件传错了？
The designer has replied
0
Reply
这个是最初版本的，打这个里面的加长版本的https://makerworld.com/zh/models/119707#profileId-128773
0
Reply
部分零件需要拿胶固定Some parts need to be fixed with glue
The designer has replied
2
Reply
文西，是你吗，转不动啊，还需要改进，三个弹片完全可以榫卯装配上去，中轴需要缩小才能转动，要不然阻力太大
0
Reply
Replying to @user_2980414438
好的小妹，我会努力改进出2.0版本的
1
Reply
Replying to @user_2980414438
我今天用PLA耗材打印确实紧，PETG耗材松紧度正好
1
Reply
东西塞进去就取不出来了...... 我得重新买个原厂料架了
The designer has replied
0
Reply
用的什么耗材
0
Reply
Replying to @user_4119660841
pla
0
Reply
Replying to @user_4119660841
可以稍微改进下就能解决问题 塞进去完全没受力点了 不是很好拔出来
0
Reply
Print Profile
A1mini料架
Fit is too tight, the hub won't rotate on the spindle. Sanded it down, only to discover that the "wings" won't attach to the hub. Tolerances are way off.
The designer has replied
0
Reply
承重推荐用PETG打印，PLA公差不一样，自己调整公差
0
Reply
请问下爪子是怎么固定到主体上的，是胶水？
The designer has replied
0
Reply
可以插进去一点，拿胶水加固
0
Reply
易生的快速PLA打的，连接件十字榫卯结构卡太死出不来了😭
0
Reply
Print Profile
A1mini料架
0
Reply
Print Profile
A1mini料架
0
Reply
Print Profile
A1mini料架
0
Reply
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld