Mushroom light for LED Lamp Kit 001 by Mdesign

Mdesign

Household>Decor

GIF

Print Profile(6)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

All, 0.2mm layer, 4 walls, 10% infill

Designer

7.1 h

2 plates

4.9(21)

All for A1mini0.2mm layer, 2 walls, 10% infill

Designer

8.3 h

3 plates

5.0(6)

Mushroom cap, 0.2mm layer, 2 walls, 10% infill

Designer

3.6 h

1 plate

5.0(3)

Mushroom gills, 0.2mm layer, 2 walls, 10% infill

Designer

2.5 h

1 plate

5.0(2)

Click to see more

Boost

370

573

612

250

Released

Description

Mushroom lamp

This table lamp is compatible with LED Lamp Kit 001. The light switch is located inside the model, so that when you click the mushroom cap, the light turns on. The light creates a very nice motif matching the mushroom's crest.

What you need:

Mushroom cap, stem, gills, lamp holder, 3pcs non-slip stickers (diameter 8 mm) and LED Lamp Kit 001.

Assembly

Pull the USB cable with the switch through the hole in the mushroom gills.

2. Fix the light in place using light holder.

3. Screw the mushroom cap to the gills.

4. Pull the USB cable through the hole in the mushroom stem.

5. Place the switch.

6. Put the excess wiring inside the stem of the sponge. Snap the two parts together.

7. Fix the cable to the stem of the sponge.

8. Attach the non-slip stickers (diameter 8 mm) to the bottom of the sponge.

Hope you will enjoy it ☺️.

Comment & Rating (53)

@Jon_NL_2023

***** perfect i added some colors in it 🤗

The designer has replied

@MDesign

Omg, that is crazy. It might be a good idea to add your created profile to the model. With your permission I would then put your photos among the photos of the model. 🤞☺️ You did a good job ‼️ 😍

@Jon_NL_2023

Replying to @MDesign :

Thanks, i will upload the profile.

@drkzin1

Replying to @Jon_NL_2023 :

I love this!! Did you upload the profile? I want to try print the same thing as you did :)

@dwaynski

Print Profile

All, 0.2mm layer, 4 walls, 10% infill

Great model. I ended up sanding the top of the cap, though, to remove some of the layer lines. Printed in Bambu PLA Basic Arctic Whisper and Bambu PLA Glow Green (to get the luminescent fungus feel going on. :P )

@rob298

Print Profile

All for A1mini0.2mm layer, 2 walls, 10% infill

easy to print

@mgscashop

Boosted

Print Profile

All, 0.2mm layer, 4 walls, 10% infill

très jolie j’adore

@pj.huyghe

Boosted

Love the design!

@mgscashop

Boosted

superbe réalisation mérite un boost, montage facile

@buster419

Print Profile

All, 0.2mm layer, 4 walls, 10% infill

printed great

@pozzonia

very nice thanks

@langep

Print Profile

All, 0.2mm layer, 4 walls, 10% infill

works as it should.

@Fatalchaos25

Print Profile

All, 0.2mm layer, 4 walls, 10% infill

took a few prints as u kept snapping the clips when I was popping them together but it's done, I put a white inside instead of yellow to make it a bit brighter and it shows the infill through the mushroom too

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(6)

Description

Mushroom lamp

What you need:

Assembly

Hope you will enjoy it ☺️.

Comment & Rating (53)

License

Related Models

Fallout Lamp TV Vault boy Vault-tec

The Ultimate Bedside Lamp (Led Kit-001 COMPATIBLE)

Led lamp Kit 001

Deathstar Signage V2 - LED Kit 001