Troyster

LordBoos

Scary Halloween Mansion - HueForge.<h4>Printing instructions:</h4>Filament swaps ONLY, no MMU or AMS required, but AMS makes it much easier.Use Original HueForge profile to get the intended look, my models are very sensitive to print settings because of color blending between layers. Every setting and filament changes for AMS are carefully prepared and fine-tuned in the Original HueForge print profile, feel free to change colors, but I recommend not to adjust other settings. If you want to experiment with your own settings or non-original print profiles, for best look print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mmYou can use same filaments as I did, or you can experiment with your own.Don't forget to upload a make!<h4>Filaments Used:</h4><ul><li>PLA BambuLab Basic Black Transmission Distance: 0.6</li><li>PLA BambuLab Basic Blue Gray Transmission Distance: 3</li><li>PLA Gratkit Gray Transmission Distance: 1</li><li>PLA BambuLab Basic Jade White Transmission Distance: 4</li></ul><h4>Swap Instructions:</h4><ul><li>Start with Black</li><li>At layer #20 (1mm) swap to Blue Gray</li><li>At layer #35 (1.6mm) swap to Gray</li><li>At layer #38 (1.72mm) swap to White for the rest.</li></ul>

Scary Halloween Mansion (Filament Painting) - HueForge

To Print

BODY3D

How so ?! Celebrate Halloween without a witch hat ?! I'm coming !&nbsp;Here is my version of the witch's hat, a crocheted hat !&nbsp;You will find 2 versions, a large hat, and a small one as a key ring.You can customize your Halloween impressions with this beautiful hat ^^ Print them without supports !&nbsp;3MF available =)&nbsp;Happy Halloween !&nbsp;IMPORTANT :&nbsp;If you want to sell 3D prints from my designs&nbsp;Please become a Patreon here : <a target="_blank" href="https://www.patreon.com/BODY3D" rel="nofollow noopener">https://www.patreon.com/BODY3D</a>&nbsp;Or Become a Triber here :<a target="_blank" href="https://www.myminifactory.com/users/BODY3D" rel="nofollow noopener">https://www.myminifactory.com/users/BODY3D</a> All my Links : <a target="_blank" href="https://beacons.ai/BODY3D" rel="nofollow noopener">https://Beacons.ai/BODY3D</a>

To Print

Printed