A1外挂料架改装A1 external rack modification
Copyright Claim
A1外挂料架改装A1 external rack modification
Boost
136
260
37
Print Profile(3)
普通料架0.2mm layer, 2 walls, 15% infill
Designer
1.6 h
1 plate
快拆料架0.2mm layer, 2 walls, 15% infill
Designer
6.6 h
2 plates
长度+10mm，2个版本弹簧臂自由组合
Designer
3.2 h
1 plate
Boost
136
260
37
0
609
166
Released
Description
Documentation (5)
Assembly Guide (5)
Comment & Rating (37)
All
Thank you. Could you please create a second version for wider spools (+5mm)? The cardboard spools tend to slide down after a few turns. I would greatly appreciate it
The designer has replied
1
Reply
OK！我修改完会上传的
0
Reply
上传+5mm配置了，打印试一试吧，我没有打印验证，有问题给我留言
1
Reply
Replying to @user_4119660841
Thanks a lot for your work. I might have expressed myself unclearly. I meant to make the "spring part" 5 to 10mm longer. Because I have cardboard spools which only have two support surfaces. Now I have heated them up and bent them a little bit so that the spool stays the "spring part" I have inclueded a couple of pictures for easyer understanding. I really really appreachiate your help. Big thanks
0
Reply
太牛了，完美适配！嘎嘎好用！
0
Reply
完美适配
0
Reply
Wow, it's a real piece of engineering, I really love how it had be created, congratulations!
On my Prusa MK3 I had a similar system, it was very usefull when I had to change color.
0
Reply
你们的不会受潮么
The designer has replied
0
Reply
一年四季也下不了几场雨，太干了
0
Reply
Print Profile
快拆料架0.2mm layer, 2 walls, 15% infill
Great print and profile but the springs need to be a little longer as they only just catch the outer spool egde.
(Edited)The designer has replied
0
Reply
发布了新配置，转轴加长了10mm，我没有打印，你可以试一试
0
Reply
Print Profile
普通料架0.2mm layer, 2 walls, 15% infill
希望有一个可以料管直通的版本，我的a1封箱后，料盘干燥箱在箱外
0
Reply
great print but there's an issue where the spool will fall off during longer prints, not sure how to fix that and it's abit annoying
(Edited)0
Reply
推荐PETG喷嘴温度：255-260、热床：75-80，速度：标准—运动
0
Reply
由于打印耗材不同，收缩率不同，零件大小松紧度自行微调
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (2)
Related Models
© 2024 MakerWorld