Mini Indoor Glider
Copyright Claim
Mini Indoor Glider
Boost
5
14
1
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
17 min
1 plate
Boost
5
14
1
0
20
0
Released
Description
Prints in 15 minutes on the Bambu P1P, 33 on the Ender 3 V2. Once printed, wait for the hotbed to cool down and gently remove with a scraper tool. Bend the elevator slightly upwards and bend the ends of the wings up. Hold the plane from just above the wing, and throw lightly.
Infill-15%
First layer height-0.15mm
Layer height-0.2mm
Nozzle diameter-0.4mm
Brim-Disabled
Supports-Disabled
Comment & Rating (1)
All
Didn't work for me.
I've printed it twice and also changed the settings (smaller layer height) second time.
I recommend the other glider from the same author, that one works.
(Edited)
0
Reply
No more
License
This work is licensed under a
Creative Commons AttributionRelated Models
© 2024 MakerWorld